Dry chemical
Class A · B · C
- 7 sizes, 1–50 lb
- Widest coverage, lowest cost
- TIS 332-2537 · 5-year warranty
Carbon dioxide (CO₂)
Class B · C
- 4 sizes, 5–50 lb
- Leaves no residue, non-conductive
- Computer rooms · electronics
BF2000 clean agent
Class A · B · C
- 3 sizes, 10–20 lb
- A clean agent replacement for Halon 1211
- UL listed · 6–8 m discharge range
FireAxz
Class A · B · C · D · K
- 2 sizes, 10–15 lb
- All five classes in one unit
- UL · ULC · NFPA 18
AFFF foam concentrate
Class A · B
- 20 lb
- 60-second discharge
- Blankets the liquid surface and prevents reignition
Automatic units
Class A · B · C
- Activates on its own at 68°C
- Covers 12 m²
- Ceiling-mounted, no operator needed
AVD Fire Extinguishers
Class D · lithium batteries
- For EVs and combustible metals
- 4 sizes, 2.0–9.0 kg
- Ordinary extinguishers do not work on these
Equipment and signage
Pumps · hoses · cabinets · turnout gear
- DELTA fire hose to BS 6391
- BSP turnout gear to NFPA 1991-2000
- Assembly point and fire exit signage
Which type should you choose?
If you are still unsure, this table narrows it down fastest
| Your site | Recommended | Why |
|---|---|---|
| General buildings, offices, shops | Dry chemical, 5–15 lb | Broad coverage, low cost, and the size building inspectors specify |
| Server rooms, computer rooms | CO₂ or BF2000 | No residue — equipment is not wrecked by powder |
| Fuel and flammable liquid stores | AFFF foam | Blankets the liquid so vapour cannot reignite |
| Commercial kitchens | FireAxz | Covers Class K, which ordinary dry chemical does not |
| EV charging points, lithium battery stores | AVD | No other type of extinguisher works on a lithium battery fire |
| Plant rooms, unmanned warehouses | Automatic units | Activates at 68°C with nobody present |
Inspection and refilling service
An extinguisher sitting untouched is not the same as an extinguisher that works. Caked powder, leaked pressure and seized valves are what we find most often on inspections.
- Scheduled condition and pressure checks
- Refilling and repressurising, every type of unit
- Replacement of parts, valves, hoses and nozzles
- An extinguisher register with the next inspection date
- Placement planning so the whole area is covered
We do not claim that any set of equipment automatically satisfies a particular authority's requirements. If it is for a building inspection submission or an insurance renewal, tell us first and we will select models whose certification matches what the inspector asks for.
Request a Quote
Send us the sizes and quantities you need, or the building drawings. We work out the number of units and where they go, with a quote within one business day.
Request a Quote